lifting camper
need advice on adding blocks above the axles on the camper to level it - concerned about back bumper dragging on camper or refrigerator not working right at this angle . . . what have others done wit...
Forum Discussion
Don't forget that lowering the hitch 1.5" will also lower the clearance you have with the truck rails/tailgate by 1.5" :(
I had the same issue with an '03 CR Cruiser with a TrailAir Pinbox and SuperGlide Hitch. Took my rig to a good frame shop and they put a 1.5" steel box spacer between each axle and the respective spring set, then made longer spring bolts to hold it together. That leveled it out nicely and the center of gravity did not change enough to be recognizable.
I had the same issue with an '03 CR Cruiser with a TrailAir Pinbox and SuperGlide Hitch. Took my rig to a good frame shop and they put a 1.5" steel box spacer between each axle and the respective spring set, then made longer spring bolts to hold it together. That leveled it out nicely and the center of gravity did not change enough to be recognizable.
