RV Crushes Truck
This guy dropped his 5th Wheel on the back of his truck on video. Not me BTW. What I can't figure out is how it happened. Go to about the 18 minute mark to see him checking everything, but it s...
Forum Discussion
ford truck guy wrote:
My guess is that it was HIGH hitched... The hitch head had nylon , and he added a new piece to the pin box... when he showed a close up after, there looked to be a small gap on the front left side of the pin box and hitch head.. Look at the 19.34 mark... you will see the gap..
Putting the break-away cable over the release handle was not smart, but I agree with the high-hitch theory. If you look at the space between the hitch plate and the pin box, it's WAY too much with that added cr@p on top of the hitch plate in addition to the disk on the pin.
Rob
