Slide Gasket
I need to replace my full wall slide "D" style rubber gaskets. Unit is a 2011 Carriage Cameo FWS 36 LXI. If someone out there would have a part number It would be greatly appreciated.
Forum Discussion
If like the ones on my Copper Canyon with the "T" spine, I needed to remove the top two corner caps. This allows you to do the sides from the top, and the top from either side.
I chose to PUSH the seal into the track rather than to pull it in. Pulling in will stretch the seal, pushing will slightly compress the seal which can compensate for any shrinkage.
I chose to PUSH the seal into the track rather than to pull it in. Pulling in will stretch the seal, pushing will slightly compress the seal which can compensate for any shrinkage.
