Slides out when not level
Due to the crown in the road, when we park on the street in front of the house to load/unload we are 1 to 2 bubbles off level when we put the curb side on a 2x10. Is this too much out of level to put ...
Forum Discussion
2hams wrote:
Thanks for the replies. We do put one 2x10 down but that leaves us about 1.5 bubble off level. We'll see if the DH would be willing to do another board or have me put the Lynx levelers on top of it.
We will see what the manufacturer says once we get the new rig. Getting anxious, even though it will sit for a while in the cold.
Get a 2nd board and screw it to the top of the one you already have, leaving about 2-3" of the lower board sticking out to make a step. If one 2-by gets you to 1.5 bubbles off, it stands to reason that 2 of them would get you to 0.5, or thereabouts. I have a crown on my street, but I'll run the tires about half-way up the rounded curb and get pretty close to level. I'm only a single super-slide, but I've never really worried too much about it.
Lyle
