sprung ramp door pics and questions
I noticed the top edge of my ramp door isn't perfectly straight. I'm guessing the aluminum was bowed before fabrication. Or the PO somehow tweaked the edge because of the four rubber street bumpers....
Forum Discussion
fj12ryder wrote:
That's not a real clear picture, maybe one more from straight on from the rear. I can't tell which is the warped part of the door and what is the side of the door.
Click the magnifying glass twice to enlarge the picture..
The sides of the door are reinforced so I'm talking about the edge which meets the ground. It has a cup or concave shape from the inside or top and doesn't meet the weatherstrip in the middle of top door frame.
First picture is eying down the back edge of the door. Its warped maybe 1/2". Second picture is my attempt to straighten, or warp it the opposite direction. I tweaked it over 2" but it returned it the previous state.
