Towing triples with toy hauler
For those of you towing triples out there. Did you install the hitch on the trailer yourself? Did you bolt or weld it to the main trailer frame? Did you connect the 3rd trailer plug wires into the...
Forum Discussion
Bought receiver tube from autohouse on Mcdowell road.Welded 2 I beams accross rear which fit inside rear I beams of 5th wheel. Then ran receiver tube about 3ft under trailer and to I beams. Also tagged rear bumber,but main support is beams.Later came back and added 2ft skid plate,so I can drag the rear and not lose anything.I soldered an RV plug brakes and lights,so I have trailer brakes on one axle of my double. I am a little over when I pull,but no problems,been to Buttercup,and CA has never stopped me.In Az I pull to Flag,Williams,Page,and down south and as long as it looks reasonable,and the equipment looks professional, I think your good to go.I take a Ranger,2 Grizzely's,Kymco 110,Honda 90,Honda 400,when everyone goes...gotta love-it. I also carry about 90 gals of fuel,so I NEVER go into stations pulling doubles.
