Toyhauler Power System Build
I’m starting a thread here about the power system I’m installing in the trailer I’m building. Most of it will be a copy and paste from another thread I have going over at SBR. Here’s the opening po...
Forum Discussion
BoonHauler wrote:
High Desert:
I spoke with the tech guys at Magnam and they recommended 10.5 VDC for the LBCO so that's where I'm set for the time being but there's still a lot of testing to be done before I drive a stake in the ground.
As for the recharge voltage, I have information from the manufacturer (Crown Battery) but it's all kind of greek to me. They do state specific gravities though and I'm going to run my battery bank down to 75% (on the TriMetric) and verify that viva specific gravity and then recharge.
I'll post the information here as well.
Thanks for the info! I must say I'm very impressed with your work. Awesome job!
Will definitely be following this thread.
Here are the pics you requested of my install. I was limited by the space I had to work with, so there were a few concessions I had to make. But I'm happy with the results overall.
