Wiring second Ac in a CC 36ckts.
Hi all , Just purchased a 2nd bedroom ac , Dometic Penquin II #641815 and they shipped me a #651815 which is a heat pump model also and comes with the control board pre-installed ,and said merry Chri...
Forum Discussion
Hi ,
bed room was prepped for 2nd ac.Power,phone line,2-wire dc connector. That all looks plug and play and matches up to the new ac. The dip switches are set in the new ac, zone-2 set , heat pump set.
Here is my issue , there is a 6 conductor cable wired to the control board,
2-yellows for load shed , 2-blues for furnace, 1-red and 1-black for + and - 12volt.
Are these needed or should they be capped off , "not for my application" or they should be connected and how .
I've searched Google University for hours , and all the documentation I could find from Dometic with no clarity .
Any help would be appreciated .
Then comes the CCC2 power down and reset to recognize the 2nd unit.
bed room was prepped for 2nd ac.Power,phone line,2-wire dc connector. That all looks plug and play and matches up to the new ac. The dip switches are set in the new ac, zone-2 set , heat pump set.
Here is my issue , there is a 6 conductor cable wired to the control board,
2-yellows for load shed , 2-blues for furnace, 1-red and 1-black for + and - 12volt.
Are these needed or should they be capped off , "not for my application" or they should be connected and how .
I've searched Google University for hours , and all the documentation I could find from Dometic with no clarity .
Any help would be appreciated .
Then comes the CCC2 power down and reset to recognize the 2nd unit.
