2007 Allergo 32 BA Wipers

I'd go through each fuse one by one. Never hurts to check.

Thanks for all your help Doug...But I have found the problem this unit doesn't have a control module...but does have two fuse panels one on the firewall & one on the top of the dash. The one on top of the dash has a 20 amp fuse which was good...but the one on the firewall has a 15 amp fuse which was bad..this fuse only has a # was a pain to locate the #...but all is working now...

I followed the wire from the switch to the big wire harness & from the motor to the big wire harness & there isn't control module on this RV for the wipers. It has been suggested that computer may have lost it's memory & needs to be replaced or re-flashed, so I guess the next step is a trip Red Bay, Al. and let them fix it...thanks for your help.

haste maker wrote:
My switch is on the steering column it is a combination wiper/washer/turn signal/high beam switch...I have the fuse on top of the dash & it has a fuse marker wiper & that fuse is good.

THAT should have the Wiper control module. When you follow the harness connected to the wiper motor, does the harness go to a module? The older Fords may have the module on the outside of the firewall. Doug

My switch is on the steering column it is a combination wiper/washer/turn signal/high beam switch...I have the fuse on top of the dash & it has a fuse marker wiper & that fuse is good.

ON the switch you replaced, one of the wires should be HOT when Key is ON. Doug

Usually the Wiper fuse is NOT in the FORD fuse box, but the added fuse box by Tiffin. Do you have the removable lid on top the dash behind the Instrument cluster? Doug

haste maker wrote:
Doug..I didn't find a wiper control module in my unit, I checked with a Ford dealer & they said it was an Allergo item, so I called Tiffin & was told by the service dept. that my unit didn't have wiper control module ? I have replaced the switch & checked all the fuses...all were good...I also ran a hot wire from the battery to the motor & it ran....Thanks for your help.

Is your switch mounted in the dash front or on the Turn signal? If Dash, does it have the center knob for OFF and Wiper speeds and the outer ring for the timing of the Intermittant? Doug

Doug..I didn't find a wiper control module in my unit, I checked with a Ford dealer & they said it was an Allergo item, so I called Tiffin & was told by the service dept. that my unit didn't have wiper control module ? I have replaced the switch & checked all the fuses...all were good...I also ran a hot wire from the battery to the motor & it ran....Thanks for your help.

dougrainer wrote:
Class A Ford Wiper control module is located on the firewall between the steering column and the Gas pedal. Doug

Will look similiar to this.

https://www.forddiscountparts.com/oem-parts/ford-wiper-control-module-9e5z14b205a?origin=pla&gclid=EAIaIQobChMIq8C_0ZXs6wIVuymzAB1kHwxfEAQYAyABEgK0dPD_BwE

Thanks didn't know there was a control module..