WinnebagoBob wrote:
I have had the same problem with call backs from HWH. What has been helpful is their web site. If you look in the pull-down for technicians you can download the manual for your unit with good trouble shooting procedures. Also, they have training programs.
Thanks Bob, I have done that and gone through the troubleshooting procedure and it points me to the board or blue wire from the board that goes to the small terminal on the solenoid (terminal #3) because I do not have 12 v on terminal #3. I am pretty sure it is the board but before I order a new one for $100+ I would like to confirm it with a technician.