50 AMP circuit breaker
Is it possible for the 50 AMP circuit breaker to go bad yet remain in the on position? In the last two weeks I have gone from repeated GFCI tripping to now getting no current to the coach. I replace...
Forum Discussion
Verify that the inverter is turned on.
Unplugging other items from GFCI protected receptacles, could allow for the GFCI to reset if it is not resetting do to fault condition. That is if you have not checked the line side of the GFCI for power from the source whether it be from inverter or 120 volt AC distribution panel.
Unplugging other items from GFCI protected receptacles, could allow for the GFCI to reset if it is not resetting do to fault condition. That is if you have not checked the line side of the GFCI for power from the source whether it be from inverter or 120 volt AC distribution panel.
