Atwood furnace troubleshooting help
I have a 1996 rv with two atwood furnaces and two roof ac. Everything worked fine until the rear furnace model 8520 stopped blowing heat, only the fan would run. I thought it was the sail switch, b...
Forum Discussion
Reset the thermostat.
Many this is accomplished by removing fuse for 15-20 seconds, then let it reboot. This could take 20 minutes.
If you have fluorescent light fixtures, a defective ballast can interfere with RF signal from some thermostats. Leave fluorescents off during reboot. After rebooting and system is working, turn on fluorescents and see if it fails.
Many this is accomplished by removing fuse for 15-20 seconds, then let it reboot. This could take 20 minutes.
If you have fluorescent light fixtures, a defective ballast can interfere with RF signal from some thermostats. Leave fluorescents off during reboot. After rebooting and system is working, turn on fluorescents and see if it fails.
