Bedroom slide breaking shear pins
I have a 2005 GB cruise air with 3 slides. Livingroom, kitchen and bedroom. When bringing in the slides I hold down two switches. When the slide is completely in or out it stops automatically and ...
Forum Discussion
Doug.
Sorry, I was just talking to my dad who has helped me fix this a few times. We actually shear 2 pins The shear pin in the far left (none motor side) shears first and then the one on the motor side shears second. If I hear the one on the left shear and replace it right away all is good. If I don’t hear it the right motor one shears soon after and that’s when the slide quits moving.
I have attached the drawings I found that closely resembles my bedroom slide set up. I can take pic next time I’m under the bed and remove all the floor covers.
Blue circle is the first shear pin to break. Red arrow is where the second one is.
Sorry, I was just talking to my dad who has helped me fix this a few times. We actually shear 2 pins The shear pin in the far left (none motor side) shears first and then the one on the motor side shears second. If I hear the one on the left shear and replace it right away all is good. If I don’t hear it the right motor one shears soon after and that’s when the slide quits moving.
I have attached the drawings I found that closely resembles my bedroom slide set up. I can take pic next time I’m under the bed and remove all the floor covers.
Blue circle is the first shear pin to break. Red arrow is where the second one is.
