Brass fitting in waste tank
I have a 35’ Monaco Monarch. I had a mound in my waste tank that would not dislodge inspite of all the tricks, such as using ice in the tank. I finally took a hose with a spray nozzle and was able t...
Forum Discussion
Depnds on may things.
If it lodges in your hose and does NOT cause a clog. No problem
If it causes a clog. Mess but still not what I'd call a problem. I'm used to all sorts of messes.
If it gets into the park's plumbing and goes straight to an oxidation pond or septic tank no problem
If it gets into a lift pump and tears it all to hell better hope the park owner is not reading this thread. But if he is not. not YOUR problem.
If it lodges in your hose and does NOT cause a clog. No problem
If it causes a clog. Mess but still not what I'd call a problem. I'm used to all sorts of messes.
If it gets into the park's plumbing and goes straight to an oxidation pond or septic tank no problem
If it gets into a lift pump and tears it all to hell better hope the park owner is not reading this thread. But if he is not. not YOUR problem.
