Changing out the City Water Connector
I hope this is in the correct section, if not my apologies! This is my first post! I just purchased a used 2003 Southwind over the weekend and the only problem I found was the city water connection...
Forum Discussion
If your swapping out one of these it is called "City water flange" https://www.google.com/search?q=Model+K7112-6_A&source=lnms&tbm=isch&sa=X&ei=BVGWU_LhKInYoASXtYLYAw&ved=0CAcQ_AUoAg&biw=1188&bih=566#q=city+water+flange&tbm=isch
First off see if your connection is loose. Other than that Pretty easy, and straight forward. I used plumber putty instead of tape. I also had a strange looking washer that I had to match up as new one didn't come with one.
But if you have something other than what is in first row of pic's in link listed, I HAVE NO IDEA.
Welcome to this forum.
First off see if your connection is loose. Other than that Pretty easy, and straight forward. I used plumber putty instead of tape. I also had a strange looking washer that I had to match up as new one didn't come with one.
But if you have something other than what is in first row of pic's in link listed, I HAVE NO IDEA.
Welcome to this forum.
