generator exhaust tube
Going to an event and will need one, I think. Anyway My generator exhaust is underneath or close to my front slide on my Itasca Cambria. Space is limited so where the heck am I going to store this...
Forum Discussion
Another home made one here :) I used thin wall PVC to make it as light as possible. If you can find some way to bungee or tie it in place around 2/3 of way up it should stay in a wind. I turned the bell end of a 3" PVC pipe up from the elbow and slip fit another short section to get length over top of MH. Each section is short enough to store easily in MH. I also used a slip coupler on the elbow so the first section of PVC is not attached to the EMT elbow. That makes storage easier.
