Help hooking up power to back up camera
I'm installing a Garmin back up kit to my 2002 Monaco Windsor. I want to connect the power for the transmitter to the back-up light circuit, but see three (3) wires...looks like white, yellow and ...
Forum Discussion
Appreciate the feedback...I did figure this out eventually. I followed the three wires to a wrapped point where they all came together...and only two wires left. I unwrapped this area and found the green wire was connected to NOTHING. Then I cleaned the two wires leaving this joint and found them to be black and white (under all the grime). from there it was pretty straighforward.
