Help! HVAC system not working at all
Hello. I have a 96 Fleetwood Southwind on an f53 chassis. I recently pulled my unit out of winter storage (had a couple days of -30s and -40s this year) to repair the inevitable burst water lines an...
Forum Discussion
The 12V wire is open perhaps due to a bad connection or other component. Your voltage under load indicates this. The compressor clutch may also not be activated.
Voltmeters have very high impedance which means they have virtually no load which is why it reads 12V until you turn the A/C on.
Voltmeters have very high impedance which means they have virtually no load which is why it reads 12V until you turn the A/C on.
