Hesitating Wiper Blades
Just installed a set of rain-x wipers. They keep the rain off but they hesitate going back and forth! Was wondering what would cause this and will it hurt anything? Thanks for all comments!
Forum Discussion
do you mean you turn them on, and its start - stop
wiper controller, worn out motor commutator, dirty connections in the wiring
or possibility a bad relay ... if your wiring has one
get chassis wiring diagram, and start by checking the relay
cheapest part in the system
no relay check all connections you can find
IF its mechanically herky-jerky, but keeps moving
its the linkage or the motor
wiper controller, worn out motor commutator, dirty connections in the wiring
or possibility a bad relay ... if your wiring has one
get chassis wiring diagram, and start by checking the relay
cheapest part in the system
no relay check all connections you can find
IF its mechanically herky-jerky, but keeps moving
its the linkage or the motor
