RLS7201 wrote:
I errored, there is more than one spring.
From page 8 of HWH's ml57000-21.pdf.
Three small contact springs mounted to the bezel plate connect the bezel plate control switch and fuse assembly to the LED board assembly mounted to the valve box. If the bezel plate is removed, the system cannot function.
Link to PDF
Richard
Thanks Richard! I know of those 3 contact springs. IMO, not a very good setup. There was 1 I had to get back into shape. When I get back from this short trip, I'll find someone that can Solder On a new one.