inverter wiring layout
Hi everyone, Just bought a 600w Xantrex ProWatt and am getting ready to install. I'm planning on installing the inverter in a small pass through space that goes from one bin to the other side of th...
Forum Discussion
My chart says #4 105C insulation in free air (no bundle or conduit) is good for at least 136 amps. 80 amp fuse is fine.
You need to connect direct on the battery or after the 150a fuse. Your choice.
Before the 150a fuse could potentially load the wire to 230a and need 1/0 wire.
You need to connect direct on the battery or after the 150a fuse. Your choice.
Before the 150a fuse could potentially load the wire to 230a and need 1/0 wire.
