Forum Discussion

goufgators's avatar
goufgators
Explorer
Jan 10, 2019

Just venting....

We've owned MH's with both 30A and 50A service (not the same MH ;). Our current MH has 50A service. There are, of course, advantages to having the higher amp service such as simultaneously running both a/c units, microwave and other draws. However, and frankly, I miss the 30A with its much smaller and easier to handle cord. The 50A cord, particularly in cold weather, is at times, like trying to return it to the storage bay as if it were a 20' 2x4 board. I know there's no solution to this problem but just had to get it off my chest. Don't think I'll ever buy another MH with 50A service. Well, actually, don't think I'll ever buy another one...period. Age is catching up with me and it won't be long before we'll have a 'hanging up the keys' ceremony...

PS Can someone direct me to instructions on how to change my signature. The MH listed was three MH's ago. Presently have a 2017.
Class A
  • rk911's avatar
    rk911
    Explorer
    Jan 10, 2019
    way2roll wrote:
    Have you considered an electric cord reel?

    that’s precisely what we did. 25’ on an electric reel. no muss, no fuss. i carry an additional 25’ feet just in case but in 3- yrs have only had to use it once.
  • goufgators's avatar
    goufgators
    Explorer
    Jan 10, 2019
    Ivylog wrote:
    Buy a 50 to 30 adapter and a 30amp cord...back to the good old days and problem solved.


    Such a simple but workable solution! Thanks for the reply...
  • wa8yxm's avatar
    wa8yxm
    Explorer III
    Jan 10, 2019
    Oh what I do... Right now my 50 amp cord is in a Rip-Stop Nylon bag in my car.

    On a 50 amp back in site I pull up. Unhook pull the car in and toss the bag out at the power pole.. Then pull out park the car back the MH in and hook up

    Exiting I reverse that process Way easier to stow it in the car than the RV.

    30 amp site it stays in the bag in teh car and I break out the 30 anp cold weather Superflex cord. Which I am using now.
  • Walaby's avatar
    Walaby
    Explorer II
    Jan 11, 2019
    goufgators wrote:
    Ivylog wrote:
    Buy a 50 to 30 adapter and a 30amp cord...back to the good old days and problem solved.


    Such a simple but workable solution! Thanks for the reply...

    Wouldn't drawing 50 amps over a 30 amp cord potentially over tax the 30 amp cord?

    Mike
  • rhagfo's avatar
    rhagfo
    Explorer III
    Jan 11, 2019
    Walaby wrote:
    goufgators wrote:
    Ivylog wrote:
    Buy a 50 to 30 adapter and a 30amp cord...back to the good old days and problem solved.


    Such a simple but workable solution! Thanks for the reply...

    Wouldn't drawing 50 amps over a 30 amp cord potentially over tax the 30 amp cord?

    Mike


    You are correct, the use of a 50 to 30 amp adapter, to use a 30 amp cable to feed a 50 amp panel is a very bad solution. You could be potentially drawing 50 amps over a 10 gauge cable. P:S

    Best solution is using SOOW 6/4 cable! Soft supple and will carry the load!!!!
  • rk911's avatar
    rk911
    Explorer
    Jan 11, 2019
    if a 30-amp adapter is placed on a 50-amp cable that cable can only be connected to a 30-amp source. on our coach the EMS (energy mgmt system) senses that and won't allow more than 30-amps (actually 80% of 30-amps) to be drawn. the last two coaches we've had since 2000 had that. in the op's situation the 50-30 adapter plugs into the 50-amp connector on the RV and the 30-amp cord into that.
  • Walaby's avatar
    Walaby
    Explorer II
    Jan 11, 2019
    And in that case, the 30 amp cable will potentially draw 50 Amps, unless you plug into the 30 amp outlet at the source.

    OP wants the convenience of 50 amp without the bulk of the traditional 50 amp cable. The alternative cable source is the best option.

    Mike
  • rk911's avatar
    rk911
    Explorer
    Jan 11, 2019
    Walaby wrote:
    And in that case, the 30 amp cable will potentially draw 50 Amps, unless you plug into the 30 amp outlet at the source.

    OP wants the convenience of 50 amp without the bulk of the traditional 50 amp cable. The alternative cable source is the best option.

    Mike

    a 30-amp cable can only plug into a 30-amp source. i may not have been clear.

    the OP is looking to go back to the good ole days of 30-amp RVing cuz the 30-amp cord is easier to handle. the only safe way to do that, IMO, is to use a 50-30 amp adapter at the RV end to which a 30-amp cord is connected between the RV and the 30-amp connection at the post. this presumes the OP's RV has a smart EMS which detects the 30-amp connection. this also presumes that his 50-amp cord is not permanently attached to the RV but rather must be plugged into the RV and the post.

    me? i think the bucket idea or the electric reel is the way to go.
  • Walaby's avatar
    Walaby
    Explorer II
    Jan 11, 2019
    I was thinking you meant 30 to 50 amp connector on trailer end AND 50amp to 30 amp connector on the source end, using a 30 amp cord in the middle, thereby theoretically accessing 50 AMP, over a 30 AMP cord.

    I like the SOOW 6/4 cable idea. Im seriously considering that option myself.

    Mike
  • oldave's avatar
    oldave
    Explorer
    Jan 11, 2019
    Come on guys use your brain .

    If you use a 30 amp adapter it will only plug into a 30 amp receptacle .

    A 30 amp receptacle will only let you have 30 amps of elect .

    You will not be able to run all your stuff at one time , it'll be like
    the old days .
    Should we run the front air or the rear air.

    The OP knows all this that's why he titled this thread " Just Venting "

    Ray

About Motorhome Group

38,705 PostsLatest Activity: Jan 14, 2025