Newmar response

MountainAir05 wrote:
go from one of the accessories and tone back to the relay /switch

If that fails, pull the fuse and power from the relay side toward the relay. Voltage should show up downstream. Relay will not work due to no ground trigger.

The way I read your statement is power flows from switch to relay but relay will not contact. If power is at relay then the ground is not working, but that could come from the accessories panel back to relay or from the switch. I no longer have my books for your RV. I sold mine some years back and all that stuff went to the new owner.

If you jump power from relay then does the accessories start working.

Thank You

I'm working on it..

go from one of the accessories and tone back to the relay /switch

If that fails, pull the fuse and power from the relay side toward the relay. Voltage should show up downstream. Relay will not work due to no ground trigger.

The way I read your statement is power flows from switch to relay but relay will not contact. If power is at relay then the ground is not working, but that could come from the accessories panel back to relay or from the switch. I no longer have my books for your RV. I sold mine some years back and all that stuff went to the new owner.

If you jump power from relay then does the accessories start working.

MountainAir05 wrote:

Tom/Barb wrote:

Tom/Barb wrote:

MountainAir05 wrote:

fuzzyface wrote:
A quick search on Amazon turned up this result:


https://smile.amazon.com/s?k=tone+wire+tracer&ref=nb_sb_noss_1

Thanks, faster than I.

Gene

Thanks guy/gals
It is on order.
Now I must learn to use it :)

I received the Tone Generator yesterday,,, what a cool tool.

Did you fine your fault

No,,

Tom/Barb wrote:

Tom/Barb wrote:

MountainAir05 wrote:

fuzzyface wrote:
A quick search on Amazon turned up this result:


https://smile.amazon.com/s?k=tone+wire+tracer&ref=nb_sb_noss_1

Thanks, faster than I.

Gene

Thanks guy/gals
It is on order.
Now I must learn to use it :)

I received the Tone Generator yesterday,,, what a cool tool.

Did you fine your fault

Tom/Barb wrote:

MountainAir05 wrote:

fuzzyface wrote:
A quick search on Amazon turned up this result:


https://smile.amazon.com/s?k=tone+wire+tracer&ref=nb_sb_noss_1

Thanks, faster than I.

Gene

Thanks guy/gals
It is on order.
Now I must learn to use it :)

I received the Tone Generator yesterday,,, what a cool tool.

My experience is that the tech side of the house will not call back. You have to call them and wait in line until they get to you. They all like to say, "call, leave us a message and we will call you back."

dougrainer wrote:
Page 143. For Frtliner. Next page for Spartan. Is this what you have 2000 is about the same as 2002.


https://newpar.newmarcorp.com/instance1Env99NEWMAR/html/images/2002DSDPOG.pdf

that's the same as ours
Ours is a 2000mountain aire.
Spartan

the relays I know about are labeled ACC# 1 and ACC#2

Page 143. For Frtliner. Next page for Spartan. Is this what you have 2000 is about the same as 2002.


https://newpar.newmarcorp.com/instance1Env99NEWMAR/html/images/2002DSDPOG.pdf

Tom/Barb wrote:

MountainAir05 wrote:
just a tip. Find the wire you want to trace and ensure you disconnect the power to the circuit 12 volt or AC. Then connect one wire to the wire tracing and the other to a ground. You will be surprise how you did without one.

Home-depot shows one,, not in this store.

ordering one from Amazon :)

Is there a good one or ?

I only use Fluke so can't help on any others.

dougrainer wrote:
On your year model, you should have a Plexiglas covered Fuse/Relay panel above the Genset. This is the area of these controls you need fixed.

I know the area in the nose cap, there are 3 boxes, which relay do you think is at fault.