Ok, so here is where we are with this.
About 20 hours from hooking up the fridge to the house power, no flashes, and the temp of the glass of water was 45 degrees.
At 24 hours, the water in the glass was 55 degrees but still no coding.
I am thinking... Great, its the cooling unit gone bad.
At that point, I disconnected the thermistor, and left the fridge hooked to our house power. This morning, we have a one flash fault code which I expected since the thermistor is disconnected, but the water is down to 36 degrees and the freezer is 13 degrees.
I would think this leads to it being a bad thermistor? Any thoughts?