Question for Class A owners.

Any vehicle presents it's own particular repair requirements. Front engine Class As (like the Ford 53) is no different. Just find a repair facility that works on them (there are many). I do my own mechanic work on my F53 and find things relatively easy. Either from underneath or remove the engine cover and work from the top.

Inside there is a removable "dog house" on gassers. It usually offers decent access, sometimes great access - better than many other vehicles.

On a diesel pusher there is typically the rear closet floor doubles as an access hatch as well. A side radiator model allows awesome access from the rear as well. A rear radiator not-so-much.

Have you worked on a new automobile recently???
I don't mean to be flippant but the new automobiles have so much stuff under the hood that it is impossible to see the engine without removing a lot of items. On both my Chevy and Chrysler, the space under the hood is so cramped that both of them have the battery in the trunk because there is no room under the hood in the engine compartment.
Motor homes are cramped for some repairs, and easy for others. If you go to a shop that specializes in RV, they will take care of you. Many medium and large truck shops will work on RV's. Motor homes have their own unique challenges, but so do the new vehicles that are on the road. The fact is that any problem can be taken care of. Some issues just take a little longer. :B

The only real challenge comes if for whatever reason they need to pull the engine. I’ve seen them go through the driver door (if there is one) or have to remove the windshield.

The bed platform lifts up on my Sahara allowing access to just about everything. I can also get to the entire driver's side of the engine from the area behind the generator bay. The chassis shop at the RV store I work at has 4 electric wheel lifts that can raise the coach a couple of feet to allow the tech to get under for lubing and oil changes. Cummins and Detroits with the side radiators allow access to almost the entire engine from the back doors.

I think it's harder to get at some of the gasser engines for service than it is a diesel pusher. Member fulltiming did a complete rebuild of an old gasser in this thread. I think he did pull the engine somewhere in the 400 pages of pictures and text.

Atlee wrote:


One thing that has me perplexed is how are the engines on Class A's repaired? How can mechanics get to the engine for major engine work? It seems as if the MH is literally built over and around the engine.

Are special repair facilities needed? I doubt you can go to your local Ford dealer in the case of a Ford chassis Class A gasser.

Thanks for any information.

The stock Ford F53 doesn't usually need much major engine work, however, it does happen. I find myself "under" the MH for most common maintenance items where access room is very generous because of the high ground clearance. (oil/filter changes, electrical wiring, lighting, transmission service, brakes, etc.) Most of the common repair items (belts, hoses, fluids, spark plugs/wires, injectors, fuses, relays, sensors, etc.) are relatively easy to get to through the exterior hood and/or the interior doghouse. IMO, the F53 is probably easier than most other Ford counterparts like the Econoline Van or the F series trucks. Since the F53 is a heavy duty truck chassis, the components are generally heavier and larger (and dirtier) than their automotive counterparts but I don't generally find it to be an issue getting things repaired and/or keeping them maintained. An adequate selection of hand tools is always a plus.

Chum lee

Edit: You should always call ahead first if/when you decide to go to a Ford dealer. Not all Ford automotive dealers have sufficient clearance at the doors/ceilings inside the shop nor can all the lifts handle the size/weight of Class A's. Not all dealers have qualified truck techs either. Your chances are better at Ford Truck dealers, but some of them just "HATE" RV's and refuse to work on them unless you're willing to wait . . . . . oh . . . . say 3 months for an appointment. Some are more than willing to help you ASAP.

If you go with a DP, highly recommend one with a side radiator. No only does it get less dirty on the side, but it is out of the way when repairs have to be made. If you have a rear radiator you have to remove it just to change a belt. Cost you $1000 just to change a belt in labor. Side radiator is the way to go.

You might want to check out some Super C rvs.

It all depends on the MH and the MEchanic. For example I know of one who basically dissassembled the front end of the RV and lifted the engine out.

Mine lifted the RV. Dropped the front axle and LOWERED the engine out.

(Had to replace engine. the most major repair).

I had to drop the engine on my Porsche 930 just to change the spark plugs. If there's a will there's a way. That said, most engines are not difficult to work on. Mine has access hatches that allow easy access to most all of the engine. There's an access hatch in the closet and in the bedroom by the bed for the front 'stuff'. Everything else can be accessed thru the back as I have a side radiator. Sometimes you gotta disassemble stuff to get where you wanna go...Dennis