Slideout

Problem solved
Replaced slideout motor with attached gearbox,gearbox had failed
Slideout now works better then ever
Thanks for all your suggestions

Motorhome is a Fleetwood 2006 Jamboree 23 e
Slideout system is a 2 rail Powergear Electric System
Motor has brake to release & also to lock slideout from moving once retracted
Just don't know if anyone has had experience in physically pushing a slideout in
Slideout has a couch & wardrobe
Thanks

ronfisherman wrote:
Every slide is different. But if you and others push on slide to retract it. Make sure that everyone pushes where there is inside support. This should avoid damaging siding.

.... and then you need to secure it to keep it from coming back out as you drive down the highway..,..

Every slide is different. But if you and others push on slide to retract it. Make sure that everyone pushes where there is inside support. This should avoid damaging siding.

depends on which one you have,on mine if you have your motors disconnected, yes, then you need to use something to block it from sliding back out