split mattress question

Our Sprinter/Thor HL24 has a split mattres. Just make the bed and flip it over, just that simple. It works well.

Rick

THOR Vegas 25.3 for one. Lots of others. Very popular in shorter class C's and even A's with a bath in the rear and a slid that goes out the side.

My 29' Winnebago C has a bedroom slide with a regular short queen mattress. Never seen the folding mattress.

We have a bedroom slide that the bed slides in and out and it is not a folding bed, it's a regular short queen.

maddog348 wrote:
news to me ~~ never saw that in an ad.

JM2¢ ~~ YMMV

Most Cs with bedroom with slide out the side and rear bath have folding beds. Seems to be in the smaller sizes too. The floor plans and sales brochures don't show it very often.

You might consider using a regular size queen fitted sheet if that folding bed is a short queen. The fold will be an easier fold with no restriction if the fitted sheet is a tad big.

Also, if you use your rig at roadside rest areas you will need to deploy the slide to sleep unless you have an additional cabover bed. You don't want to open a slide into a travel lane. You might end up with a tri-folding mattress.

It should be comfortable , not many complain about that. As far as additional cost to replace....it will last many years, I would not worry about that.
The rv will start to leak before the mattress wears out.

We have had our bedroom slide with split mattress for over four years. We do not strip the bed. Just flip up and minimal adjustment when you flip back down. Comfort was good but as one of us is at 270# we added a foam mattress pad and it still folds easily. The split is under the leg area and is not not noticeable even when getting in and out from the bottom. Our longest trip was thirty days and comfort was good. We have not replaced, but I will assume that cost will be higher.

news to me ~~ never saw that in an ad.

JM2¢ ~~ YMMV