Spout

THE SPOUT CONNECTOR IS USHALY TAPED TO WIRE HARNES BY DISTRIBUTOR OR IGN. MODULE YOU WILL KNOW ITS THE RIGHT ONE WHEN DISCONNECTED THE CHECK ENGINE LIGHT WILL COME ON

try this has pictures.


https://www.google.com/?gws_rd=ssl#q=ford+460+spout+connector

It's located on the outside of the fire wall in front of the drivers feet. Look for a aluminum heat sink with the ignition module on it. The spout plug will be hanging just below the ignition module. It may be partly obscured by the radiator over flow tank.
The spout connector is the easy part. Seeing the timing marks is a challenge.

Richard
95 Bounder F53

Thanks, I already wondered haw I was going too see them!

how