Stove grates rattle

rvten wrote:
There should be 4 rubber grommets one on each corner of the grate.
Used to put a rubber pot holder under the grate. Till we got a wooden stove top cover.

I had the same rattle issues. Most of the silicone grommets were missing. They are readily available for cheap and are heat resistant, and totally fixed the rattle issues.

Set of 8 Suburban brand for $8 with free shipping.

Sorry, cannot get the ebay link to display properly. Either copy and paste into the address bar and then remove the [emoticon][emoticon] from the address before hitting enter, or simply search on Ebay for 151937323981 or search for RV stove grommet

http://www.ebay.com/itm/Stove-Range-Grate-Rubber-Grommets-SET-OF-8-Black-for-Camper-Motorhome-RV-/151937323981?hash=item23602b93cd:m:mZOSz_UX49O6cgtN8zPxyGw&vxp=mtr

Charles

This is our stove. The grates used to resonate loud which bothered us while driving.


I did two things to eliminate the irritation.

1) bend/spread the grates a little open so they are snug inside the alignment holes.

In our rig, the stove is recessed into the counter top. We place the flush counter-top covers on for extra counter space for doing dishes and such, so the covers are on soon after cooking. As part of the ritual, we drop on this silicone rubber pot holder thingy bought at Walmart to eliminate any extra resonating noises.


Between the two, the various stove noises while driving are all gone.

cgmartine wrote:
Actually, the microwave dish/turntable should not be left in the micro wave, but placed securely in a drawer, otherwise, it might fly out during a sudden stop.

I've i'm involved in an incident that causes the turntable to departs the microwave, that will be a least of my problems.

KristinU wrote:
We made a cover for ours with a big bamboo cutting board that I attached non-skid shelf liner to the back with contact cement. The weight of it keeps it from rattling plus it gives us some extra surface when the stove isn't in use.

That's exactly what I did! Works great and looks good, too!

Camping world sels a cutting board that has 4 rubber gromets that are adjustable and this keeps the grate down, plus you have more counter when not cooking.

navegator

I'd stuff towels or paper towels in them.
I'm fussy about rattles in vehicles. But in an RV, I have a completely different standard-which is to ignore anything behind the cab area that is not a harmful noise. I'm completely at peace with the sounds of the rolling home-and the stove certainly is a source of some of them.

Actually, the microwave dish/turntable should not be left in the micro wave, but placed securely in a drawer, otherwise, it might fly out during a sudden stop.

williamwas wrote:
Thanks everyone. Simple solutions are the best. Off to buy some pot holders. Thanks again.

If you have some pieces of Styrofoam laying around you might not have to buy anything. Don't forget to cushion the microwave turntable too.

We made a cover for ours with a big bamboo cutting board that I attached non-skid shelf liner to the back with contact cement. The weight of it keeps it from rattling plus it gives us some extra surface when the stove isn't in use.