Sway bar or Steering stabilizer?

I have the W22 chassis and do not have any issues with steering, pushing from passing trucks, or high wind wandering. I routinely travle in the Great Plains when high winds are the norm. The chassis already comes from the factory with a heavy duty sway bar. I did add a hydraulic steering stabilizer. I have not added, and do not feel that I will ever need trac bars. Before you spend the money on any suspension "fixes" I would check your coach loading and front end for looseness. Make sure that the front axle is loaded close to max and then go with the original mechanics suggestion about a steering stabilizer. I think you will find that is all you need.

Thanks for all the great advice, I think I will get some track bars coming.

No air bags would suggest it is probably safe to assume a W22. If that is correct, the advice is that W22 desperately needs track bars. There is gobs of delay in steering response as the axle catches up to the steering input.


Just an additional comment on edit. My dad has a W22, which is the primary source of my input.

This is like pulling teeth. Lol

Both P and W chassis were build through mid 2005, so it DOES make a difference: http://www.rvbusiness.com/2005/05/workhorse-adding-chassis-to-w-series/

This is an 03, no airbags.

Workhorse W or P? The two have completely different front suspensions.

If P, what PSI in the front air bags?

Workhorse chassis.

wilanddij wrote:
You would probably be better served by adding a Track (Panhard) bar to both front and rear axles. These keep the axles and chassis tied together laterally, and reduce side-to-side play which causes your coach to be a "handful". Do a search on Google for "rv track bar".

X2 Steering stabilizer is normally considered a bandaid and should only be used as a last resort. You should note that a sway bar is NOT a trac bar. Your coach likely already has sway bars. sometimes they can be relocated, or stiffer ones installed, but those effect the ride quality. The trac bar or Panhard bar should not have any impact on the ride quality, but will likely make a huge difference in handling response.

As mentioned, we need to know what chassis you have. Some of the Workhorse W chassis already have a stabilizer bar although it does not look like the traditional stabilizer bar used on other coaches. The Workhorse stabilizer does not have any bushings and is connected directly to the suspension steel to steel. Since th shop suggested shocks and a steering stabilizer, it may be because you already have everything else.
As a point of reference most coaches will handle better if they are close to maximum gross weight on the front axle. An RV that is light on the front axle will tend to wander while on the highway.