Transmission temperature
I have a 1998 f53 chassis title as a 99 Winnebago with a V10 and my question is with an OBD2 ScanGauge where does it read the temperature before or after the transmission cooler if I remember correctl...
Forum Discussion
MountainAir05 wrote:
My 99 and the 2000 ports are OBD2 our computers are OBD1. Port are located below the right knee. I have own it since new and It has been work on by Ford and at one time I had a letter from Ford stated that it was a OBD1 system on a 99 chassis. Had something to do that they were allowed to use up the old system to get them out of the system. I assure you I check it out with Newmar and DOT.
I'd love to see that letter... I've found nothing online so far that indicates Ford went to the extent it would have taken to re-engineer older OBD1 ECU's to work with a COP V10 with an entirely different sensor set. I'd think just releasing the remaining units in stock to the replacement parts market would have been much more cost effective. There are still plenty of 460's around that require new ECU's from time to time. If anyone can find more information about this, please post the links.
