What did you do to your Class C MH today???

Spent 2 hours polishing ONE Alcoa wheel! Actually, it was quite therapeutic :-)

Before



After

Completed installation of a 3 panel sliding shower door. Original pleated show curtain was starting to show it's age. Hard to get a good picture in a small area.

Nice and what a great ideal hanging it upside down....:h

Added shelves they are 9 in wide, had to order from Orginize it.com the ones ar lowes are 12 in.and yes I know they are up side down,keeps things where they belong.

Did the pink stuff thing. Man, I hate the thoughts of winter coming. Serious depression setting in here.

Took her to repair shop for roof reconditioning and caulking.

installed the progressive industries surge/voltage protector. to test it i fired up the genny... and found out it was putting out 134 volts at 63hz, no load. a bit high. so tomorrow i will back off the rpm until i see 60hz on the PI display. that should drop the voltage down to reasonable.

Had a Carefree electric awning and a Tireminder TPMS system installed then I brought the rig home and gave it a good bath. Today, I am going to change the oil in the generator and start prepping for our trek to FL.

Winterized the water system. Looks like freezing tomorrow night and getting cooler fast.

Changed the fuel filter, Oil and oil filter and greased it. Changed the oil in the generator. Still need to top off the fuel and propane.

I have room to store it in the front yard and have a rear drive that I usaly store my RV in. But again this year I think I will store it in the front as its cement and I want to pack the front wheels, Drop the drive line and check the U joints and center carrier bearing before our trip to Yellowstone and Mt Rushmore next year. Makes it a lot easier when its on the cement.

We will move it to the rear drive for Halloween as we always get lots of kids and when I move it back to the front I will fuel it and cover it for the winter. :(

Still not to sure where summer went. However my wife and I love the seasons so going to stay here.

Got some new foam from a friend for the dinette cushions. He sells and rents hospital beds ect. Had a new mattress come in with a small tear in the cover. They can not use it and the company said junk it and they sent another.

I now have new foam in the dinette cushons. Its an extra, extra firm foam and made a big difference. We now set several inches higher on foam thats only 1/2 inch thicker. Wife sleeps on it and when she tried it she was ready to go camping again this weekend. But we have been gone the better part of the last month so need to get things ready for winter as we are already having frost in the mornings. Great afternoons near 70 just make me want to hang out in the sun and watch the deer and Canadian Honkers. Now if some one will just rake the leaves.

One more thing off the to do list. I rebuilt the jack knife couch bottom cushion last winter now going to rebuild the back of it But no hurry to finish it. Need to change the oil, filter, lub and winterize motorhome first.