Xantrex inverter/charger issues
We lost external AC power and batteries went down to 12.4 volts. When power was restored the inverter went to bulk charge but only at 13.5 volts or so. I usually see 14.4 or so charge volts. I think I...
Forum Discussion
lfeather wrote:
We lost external AC power and batteries went down to 12.4 volts. When power was restored the inverter went to bulk charge but only at 13.5 volts or so. I usually see 14.4 or so charge volts. I think I saw 92 amps DC charge rate on the led. I have new (couple months old) lifeline AGM batteries and the inverter/charger is set up for AGM batteries. Has anyone seen this issue with their inverter? TIA.
Larry
Isn't that reading the battery voltage? In other words, the batteries are absorbing the voltage coming out of the charger because they were depleted more than normally and the rate shown will climb as the batteries become fully charged.
