1 dish, 2 receivers, 2 TV's.
Hey all, I have a 2016 Cougar 333MKS, trying to make a long story short. Can I run 1 cable to my coach then a splitter each side going to a receiver and run 2 TV's at the same time?
Forum Discussion
Linedog wrote:
Hey all, I have a 2016 Cougar 333MKS, trying to make a long story short. Can I run 1 cable to my coach then a splitter each side going to a receiver and run 2 TV's at the same time? . . . I know Dish has spitters that install behind the receiver that will send the same signal to 2 TV's.
If you use a DISH Hopper and Joey, yes.
If you use a DISH 622 or 722 receiver, yes.
If you use a DISH VIP 211 or 211k or a VIP 211z, yes.
Note that all the above "split" the TV signal at the receiver.
However, if you want to "split" the incoming SAT signal to 2 or more receivers, I'd recommend just running two SAT lines into your RV, one for each receiver.
Or you could use a DPP44 switch, but I wouldn't recommend it for an RV:
