Bill.Satellite wrote:
Are you trying to use the 2 receiver setting and going to the 72 satellite? Did you get a successful check switch? If you are trying to use the 1 receiver setup with 2 receivers you must connect 1 receiver to the main output and preform a check switch. You will then need to connect the other receiver to that same cable and do a check switch on that receiver. Once you have each running successfully by themselves you will be able to connect both.
Thanks Bill... As soon as my check switch is complete, it jumps directly into trying to download the software ( unsuccessfully ). I have tried single Wally into the main port... and also tried the dual Wally, with 1 in the main, and 1 in the secondary port..
I have NOT tried it your way, but still cannot get past the download portion
