Connect DTV H24 to 18" round dish
This has been discussed before but here is my experience. H24 is hooked up for HD at home with a dish separate from the house. It uses a SWM device. I had previously used a simple SD receiver in t...
Forum Discussion
I am still not getting it. The SWM LNB the cable from the LNB first goes to the SWM through a wall cinnrctor and from the SWM a second cable goes to the receiver. For the 18" dish the cable from the dish goes directly to the receiver so the cable inside the trailer that comes from the connector coming into the trailer from the dish must be disconnected from the SWM and connected to the receiver after disconnecting the receiver from the SWM. That can't be done with just an A/B switch but can be done as I have described it by completely bypassing the SWM thus permitting the receiver to send the proper voltages to the 18" dish.
