Directv zero signal
In a nutshell. At home I have a slimline dish with (SL3 LNB?) I have a HD DVR (HR24) in the living room and a HD box (H21) in bedroom. This was setup buy Direct and all works perfectly fine. When c...
Forum Discussion
Thanks guys.
No Bill-it is not set for SWM. Both boxes still do and have since 2007 say multiswitch. Also my HR24 has 2 cables coming in. HENCE I have said very clearly I HAVE NEVER HAD TO MAKE ANY FRICKEN CHANGES!!! Seems everyone wants to make me sound like the fool. Well guess what. Somebody just may be, and it is likely me! But not for the reason you think.
Someone told me to recheck the cables. Good advice, also the very first thing everybody thinks of and does.
Some mentioned different problems that are related to dishes mounted on the RV roof. AGAIN read my post. How could that possibly relate to my problem?
Seriously, I just wanted you guys to READ, READ, READ my post, then give me a logical answer. The only logical posts are the ones that told me of a possible solution. (IE) check cables--warped dish itself.
SWM-multiswitch could be a real problem granted, and it makes perfect sense, except, AGAIN if you would have really READ my post, I said I have never made any changes. If the house had been setup for SWM. and my portable setup was not, well then DUH!!! I would have been making changes, but I havent been.
Dont missunderstand me, I truly do appreciate your responses, but really just handing out different ideas, without truly understanding what the real problem is, just wastes lots of time and makes the people involved just more angered.
AGAIN thank you all very much
No Bill-it is not set for SWM. Both boxes still do and have since 2007 say multiswitch. Also my HR24 has 2 cables coming in. HENCE I have said very clearly I HAVE NEVER HAD TO MAKE ANY FRICKEN CHANGES!!! Seems everyone wants to make me sound like the fool. Well guess what. Somebody just may be, and it is likely me! But not for the reason you think.
Someone told me to recheck the cables. Good advice, also the very first thing everybody thinks of and does.
Some mentioned different problems that are related to dishes mounted on the RV roof. AGAIN read my post. How could that possibly relate to my problem?
Seriously, I just wanted you guys to READ, READ, READ my post, then give me a logical answer. The only logical posts are the ones that told me of a possible solution. (IE) check cables--warped dish itself.
SWM-multiswitch could be a real problem granted, and it makes perfect sense, except, AGAIN if you would have really READ my post, I said I have never made any changes. If the house had been setup for SWM. and my portable setup was not, well then DUH!!! I would have been making changes, but I havent been.
Dont missunderstand me, I truly do appreciate your responses, but really just handing out different ideas, without truly understanding what the real problem is, just wastes lots of time and makes the people involved just more angered.
AGAIN thank you all very much
