Forum Discussion
road_glide
May 07, 2015Explorer
Okay ...success....received the new Dish Pro Plus LNB and switched it out on the outside home dish 500. The old dish pro had two inputs both white in color, the new DPP had 2 blues and an additional output which I don't use. Went inside the house and powered up the 311k that was already hooked up and received all programming, no problems.
Switched receiver inputs and outputs to the 322 I just bought and installed the Dish Network separator to the one coax feed coming in the house. Powered up, acquired signal and then loaded program guide...and the 322 is working properly, all subscribed channels are coming in. So the culprit in getting the 322 to work originally was the old Dish Pro LNB.
So the 322 stays in the house now and later I can coax to the spare bedroom and have alternative programming for the kids and wife and I can watch what we want on the living room big screen.
The 311k will go out in our RV and that I am working on now. I will pull the RV out of the barn this Friday and try to have success with the 311k in the RV.
THank you everyone!
Switched receiver inputs and outputs to the 322 I just bought and installed the Dish Network separator to the one coax feed coming in the house. Powered up, acquired signal and then loaded program guide...and the 322 is working properly, all subscribed channels are coming in. So the culprit in getting the 322 to work originally was the old Dish Pro LNB.
So the 322 stays in the house now and later I can coax to the spare bedroom and have alternative programming for the kids and wife and I can watch what we want on the living room big screen.
The 311k will go out in our RV and that I am working on now. I will pull the RV out of the barn this Friday and try to have success with the 311k in the RV.
THank you everyone!
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023