dish network two receivers - rubiks cube
If this is too long, click me and go to another post...LOL Dish network for 12 years, 301 receiver in the S&B, took it with us in the MH and used it after set up no problems for last 3 years. Last D...
Forum Discussion
Now I am trying to program the UHF remote in the RV and getting code 590. The Dish Network receiver 311k is out in the RV now and I thought I would spend some time seeing if I could program the UHF remote. I have installed the remote UHF antenna and there is no UHF/IR switch on the back of the receiver so this is a work in progress..getting late..may hit the sack...
basically "the remote address you are trying to use is already being used. Choose another address."
But when I am at system info it will highlight the tab but will not let me change the numerical channel number. I just got off CHAT with dish and the CSR said only push Sat and then record. That did not work either. The tab I have showing under system info still shows IR and remote address 1 and channel out 3. But again it won't let me change the code. MY 21.1 remote control I have the switch in the battery compartment moved to UHF.
Found it:
ERROR You are attempting to set both remotes to the same address. You are not allowed to do this. Please select another remote address for one of the two remote addresses
basically "the remote address you are trying to use is already being used. Choose another address."
But when I am at system info it will highlight the tab but will not let me change the numerical channel number. I just got off CHAT with dish and the CSR said only push Sat and then record. That did not work either. The tab I have showing under system info still shows IR and remote address 1 and channel out 3. But again it won't let me change the code. MY 21.1 remote control I have the switch in the battery compartment moved to UHF.
Found it:
ERROR You are attempting to set both remotes to the same address. You are not allowed to do this. Please select another remote address for one of the two remote addresses
