Dish receiver problem
We have a winegard roadtrip t4 dome satellite dish with two satellite feeds and use two Wally receivers. This is our first trip with two wallys. I know that both receivers must watch channels on the ...
Forum Discussion
Bill,
Thanks for the info. However, I switched receivers and when I put the one with sw64 on it in the secondary receiver location, nothing would come on. It was stuck in the acquiring signal status. I checked the status and it showed sw64 with green on all satellites. The one receiver I put in the primary position switched over to sw64 and works fine. I am stumped. Did I do something wrong.
Thanks for the info. However, I switched receivers and when I put the one with sw64 on it in the secondary receiver location, nothing would come on. It was stuck in the acquiring signal status. I checked the status and it showed sw64 with green on all satellites. The one receiver I put in the primary position switched over to sw64 and works fine. I am stumped. Did I do something wrong.
