Identifying TV Cable Out/Inlets
Is there an easy/non sophisticated way to find out which cables goes where? Example, something to hook into an external port that would energize the cable and then go inside to test outlets to see ...
Forum Discussion
I cut two pieces of coax off with a connector. On one I stripped the wires and twisted them together. The other I separated the wires so I could check them with an Ohm meter.
I put the shorted connector on my outside connections and checked the other ends under the cabinet with the Ohm meter. You might need a barrel connector if you have to check coax cables instead of connectors on the other end.
I put the shorted connector on my outside connections and checked the other ends under the cabinet with the Ohm meter. You might need a barrel connector if you have to check coax cables instead of connectors on the other end.
