Forum Discussion
YC_1
Jul 13, 2018Nomad
Time to pull a new cable. I suspect you will find the old one soaking wet. If you find it wet try to find a midway point in the conduit and drill a hole from top through the bottom once you pull the old cable out and just have a string attached.
Then seal the top hole. It does not need to be any bigger than 1/8 of an inch drill bit.
Then seal the top hole. It does not need to be any bigger than 1/8 of an inch drill bit.
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023