Forum Discussion
Bill_Satellite
Nov 26, 2013Explorer II
PSU_RVr wrote:
Sorry for the delay getting back.
I'm getting 110, 119, and 61.5. Turns out I had it set to hybrid originally, but changed it to the default and I'm getting the same 3 as before.
Will check the manual again for setting for the eastern arc.
You are going to have to do a new Check Switch routine before the receiver can learn what settings you want it to use. Hopefully, you changed the dip switch settings so switches 4,7 and 8 were down and all others up.
I highly recommend that you first clear your existing check switch by unplugging the incoming coax from your receiver and run a check switch. This will find nothing and clear your receiver memory. Now reconnect the coax and follow the exact instructions for doing a Check Switch. They must be followed in a very specific order and time frame to get the necessary results.
If you don't have a manual, you can get the step-by-step instructions here:
Winegard Check Switch
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023