Satelite signal
Not my first rodeo but I am stumped. Set up my new to me satellite tripod and dish this morning. Used a satellite finder and got the satellite almost immediately had signal strength of 97 at the sat...
Forum Discussion
TyroneandGladys wrote:
Several have suggested that I have the wrong satellite. I did say that I had 97 signal strength but what I failed to say is that with the satellite finder hooked up not only I am getting 97 signal strength but also all of my programing. So in that case it has to be the correct satellite correct?
Big Katuna thanks will check that out.
What kind of antenna are you using and what model receiver? If this is a single LNB antenna and ON THE RECEIVER signal meter you are seeing a 97 on the 101 satellite then the only likely scenario is a bad coupler or a center wire that's a bit too short.
If you think it's the coupler just have someone watch the TV and touch the 2 ends of the coax and the 2 edges of the coupler together and you will see and instant picture. If not, we need more information about your setup.
