1Longbow
Nov 30, 2015Explorer
tv tiling
Why does my tv tile when the pump or the furnace are running? We are connected to shore power. Thank You.
krobbe wrote:
Something to consider is the signal amplifier/booster is being affected by either low voltage or interference from those high draw motors.
Consider this AMPLIFIER SIGNAL BOOSTER to address your issues.
krobbe wrote:
Something to consider is the signal amplifier/booster is being affected by either low voltage or interference from those high draw motors.
Consider this AMPLIFIER SIGNAL BOOSTER to address your issues.
1Longbow wrote:
Powering tv = 110V
It always pixelates but we just figured out that the pump and furnace makes it pixelate
It has always done it
We are using the antenna
1Longbow wrote:
Powering tv = 110V
It always pixelates but we just figured out that the pump and furnace makes it pixelate
It has always done it
We are using the antenna
1Longbow wrote:
Tried connecting the battery ,still the same thing. Thank you for your answers so far.
1Longbow wrote:
Tried connecting the battery ,still the same thing. Thank you for your answers so far.