VIP211K and Winegard Pathway X2 "Mobil Antenna Settings"

Just set the Pathway roughly level with the cable connections more or less facing north, connect the cable from the pathway to the receiver, connect the receiver to the tv inputs, turn on the tv, and plug in the receiver. Leave it alone for 2 - 5 minutes and the mobile antenna set-up screen will appear. Follow the screen prompts and everything is automatic. The first few times I did mine I got impatient thinking it wasn't working and started turning things off and on. All that did was foul it up.

If you want to change any of the settings, like to a different state, satellites, etc. I think you have to unplug the receiver, then plug it back in and start following the prompts again.