Winegard Sensar Pro tweaking
I put the antenna up, turned on my Sensar panel, peaked the signal, set the gain for 20 (max) and scanned for channels. Found high teens. But was missing some of the majors and could get some of t...
Forum Discussion
wa8yxm wrote:Its likely being swamped by transmitters considerably closer than that
It mentions this in the Sensar Pro Manual as I recall. but yes, TOO MUCH GAIN can overload the Television so you sometimes need to crank it down at 30 miles, I would expect this, Gain of 20 is for 50-60 miles.
