Winegard Traveler Satellite
Hi:
We are experiencing a problem with our Winegard Traveler satellite. We are currently in the states and the satellite had previously been working just fine (problem free for a long time actually). Our satellite service provider is Shaw Direct.
What happened the other day was that we had driven for the day and arrived at our new rv park, we deployed the satellite in the usual fashion, but the satellite display keep reading "locating satellite" it even peaked, but then went back to "locating satellite" until finally it stowed itself. We tried it a couple more times. No luck / same thing happened. so we had to watch tv using cable. Note; there was nothing blocking the satellite as we were in an open space.
I contacted our satellite service provider and they conformed everything from their end was in complete working order.
Two days later we travelled and again, deployed the satellite. We hoped with a new location that maybe this time it would work. However, no such luck. The satellite did exactly the same thing. This time we had the tv on and tuned to the "status" option - and we could see that the satellites were found based on the tv screen display. But then satellite continued to move and signal was loss as it trying to locate satellite. Again there was nothing blocking the satellite as we were in an open space.
Two days later we travelled and again, deployed the satellite. Third time was not the charm; the satellite did the same behaviour.
Next I tried the manual option in winegard and located satellite 111. The satellite behaved the same way, continuing to try to "locate satellite" until it stowed itself.
I redeployed that satellite, and by looking at the tv screen display of the satellite status, once satellite 111 was located, I unplugged the winegard box. This has resulted in that we have some satellite stations, but this is not the solution. Some is seriously wrong with the Winegard Traveler.
Any ideas?
thanks, peter
We are experiencing a problem with our Winegard Traveler satellite. We are currently in the states and the satellite had previously been working just fine (problem free for a long time actually). Our satellite service provider is Shaw Direct.
What happened the other day was that we had driven for the day and arrived at our new rv park, we deployed the satellite in the usual fashion, but the satellite display keep reading "locating satellite" it even peaked, but then went back to "locating satellite" until finally it stowed itself. We tried it a couple more times. No luck / same thing happened. so we had to watch tv using cable. Note; there was nothing blocking the satellite as we were in an open space.
I contacted our satellite service provider and they conformed everything from their end was in complete working order.
Two days later we travelled and again, deployed the satellite. We hoped with a new location that maybe this time it would work. However, no such luck. The satellite did exactly the same thing. This time we had the tv on and tuned to the "status" option - and we could see that the satellites were found based on the tv screen display. But then satellite continued to move and signal was loss as it trying to locate satellite. Again there was nothing blocking the satellite as we were in an open space.
Two days later we travelled and again, deployed the satellite. Third time was not the charm; the satellite did the same behaviour.
Next I tried the manual option in winegard and located satellite 111. The satellite behaved the same way, continuing to try to "locate satellite" until it stowed itself.
I redeployed that satellite, and by looking at the tv screen display of the satellite status, once satellite 111 was located, I unplugged the winegard box. This has resulted in that we have some satellite stations, but this is not the solution. Some is seriously wrong with the Winegard Traveler.
Any ideas?
thanks, peter
