Bill.Satellite wrote:
You must buy the antenna, arm and LNB from Winegard to convert your DirecTV Trav'ler to a Dish Network Trav'ler and you must reprogram the controller for Dish rather than it's current programming for DirecTV. It is an easy do-it-yourself job assuming you are at little bit handy and don't mind going up on the roof. Do not worry about the factory and customer interface slots, you don't need anything plugged in there. You will need the Winegard Power supply which supplies 48VDC to the antenna and you will need to plug in the 6-wire square plug that runs from the antenna to the controller.
Bill, that's pretty much what you said about the conversion in the thread I linked too... :B