Winegard trav'ler question
In 2009 I installed the Trav'ler on my 2010 Sabre. There was an optional cable that could be purchased that would allow it to be setup to automatically stow itself, if you forgot to do it. The cable...
Forum Discussion
wa8yxm wrote:Did you read my entire post?
DO you have a photograph of the connector. Odds are you can either
1: make a matching connector or 2: find one on the market.
Then make up your own cable.
Making the cable is not a problem.
Knowing what the 4 wires in it do, and what position they have in the connector is the info I need.
Each wire is for a different kind of trigger source. Guessing and putting 12V into a wire that is supposed to sense a ground, would probably be a bad thing.
Trial and error won't work. I gotta know for sure.
